Leather Chemicals by Chemtan Company, Inc.
 
FEATURED NEW PRODUCTS
CHEMOL® 63-T is a workhorse fatliquor for split suede for inner softness, enhance color value and feel after dry milling. Highly concentrated activity level is 80%.
Blue Line
CHEMOL® 451 Highly sulfated oil based on natural vegetable materials. Ideally used as the main fat liquor for low cost leather linings. It also can be used as an all purpose fatliquor alone or in combination with other raw oils or fatliquors to produce a round, soft, fluffy leather. This product is concentrated and available at 70% concentration, highly sulfated, SO3 content 4-5%. Also capable of carrying other raw oils in a water/oil emulsion. This new product is completely bio-degradable. This product requires pre mixing before use. MORE INFO
blue line
CHEMOL® 456 A unique blend, of solvent oil, plus natural, sulfated oils, and lubricating syntans. This versatile, main fatliquor is suitable for making a wide range of leathers including tight, soft, nappa style leathers. Highly concentrated with 60% activity, moderate SO3 level 3-4%. This product requires pre mixing before use. MORE INFO
blue line
CHEMOL® 385 is a finishing compound for oiling off with a wax component to produce a very dark surface especially suitable for the range of medium to Black colors. This product is especially effective for upgrading leathers by minimizing the appearance of surface defects.
Blue Line
CHEMOL® 462 RS Compliant is a highly concentrated (100%) natural fat liquor with special emulsifiers for both automotive and furniture leathers with very low fog values.
Blue Line
CHEMOL® 565 Sign A synthetic oil and wax blend used as an oiling-off compound, and will also increase maser flexes. The application of this product produces a very dark surface for pull-up leathers. The product appearance is a semi solid black wax with 100% activity. MORE INFO
Line
CHEMOL® 790 Sign

is a cationic fatliquor which is NPEO free. This product can be used as a prefat to improve softness and fullness in milled leathers, or used as a topping oil to enhance surface richness and feel. 60% activity.

Line
CHEMTAN® CR-1 RS Compliant Removes residual calcium on the bluestock surface, and can be used for both waterproof and non waterproof leathers. The following chemical additions in the retan, coloring, and fatliquoring are found to be less likely to precipitate on the surface which typically has a negative influence highlighting defects and poor color uniformity. When applied at a 1~2% level as a pre wash cleaner, brighter, and more uniform coloring is obtained. Dye levelness, color uniformity, and dye penetration are markedly improved. Activity level 39% and a pH of 10.5 MORE INFO
Blue Line
CHEMTAN® E-69 Sign A syntan dispersion for retanning to help produce soft milled leathers for increased cutting yields.  This product masks imperfections, and fills veins. Significant plumping occurs in the retanning unlike normal syntans.  Only available in liquid form ~ 60% actives and slightly anionic. This is a heat activated product@70C for 30 minutes before drum washing. MORE INFO
CHEMTAN® R-1 Sign A new resin based polymer which improves grain break, and is a dispersant for retanning materials and fat liquors to improve surface color uniformity for nubucks and full grain leathers especially waterproof. MORE INFO
BLue Line
CHEMTAN® R-161 Sign A resin dispersion used in retanning to help produce full, round, tight, smooth leathers for increased cutting yields. This product masks imperfections, and fills veins. Only available in liquid form ~40% solids, and slightly anionic. This is a heat activated product @70C for 30 minutes before washing. Do not store this chemical in direct sunlight. MORE INFO
BLue Line
CHEMTAN®R-223TRS Compliant  
BLue Line
CHEMTAN® R-276T Sign A specialty resin in dry form, 95% active, and useful for tight grain, soft leathers. Formaldehyde free. MORE INFO
Blue Line
CHEMTAN® S-52 RS Compliant This is a water resistant retanning fatliquor containing silicone polymers. It is used to produce high performance water resistant leathers, and suitable for light and heavy weight leathers. Has excellent dynamic and static water resistance, low extractables. lightfast and heatfast. Produces tight, smooth grained, full leathers. In the form of an off-white thick emulsion, concentration is 60% activity, and the pH is 5.8 MORE INFO
Click here to return to Complete Product List
 

© Copyright 2005-2014 Chemtan Company, Inc. All Rights Reserved.